Three points for attention in the use of gun head crushing hammer
點擊次數： 更新時間：19/07/18 16:40:07 煙臺華拓工程機械有限公司
Gun head crushing hammer has become an important tool for excavators, crushing hammer is also known as a crusher or broken stone tools, today to introduce the knowledge is about the use of gun head crushing hammer matters needing attention:
1. When the gun head crushing hammer strikes continuously at the same point for more than one minute and fails to break the target object, please change the selected point of the strike and try again. Trying to strike at the same point will only result in excessive loss of the rod.
2. When working, do not use the guard plate as a tool to push the weight, otherwise it will only cause the break of the guard plate screws and drill rods and damage to the crusher, or even cause arm fracture.
3. When the rock or target object has been broken, please immediately stop the striking action of the gun head crushing hammer. The continuous and aimless impact will only cause the precursor and main body screws to loosen and damage, or even damage the construction machinery body. In the case of aimless attack, it is not only due to improper insertion, but also due to the use of the gun head crushing hammer shaking.
Only when the gun head crushing hammer is used correctly can the fault be avoided and its service life be extended. If you have the demand of gun head hammer, please contact us, we will provide you with quality service.